Product Name:
China FAW Tuck 9T & 16T Axle Shaft Oil Seal ,FKM TC Oil Seal
65x80x12
Products Details:
Product Name | Axle Shaft Oil Seal |
Size | 65X80X12 |
Truck Model | FAW Truck |
Material | FKM or Depends on inquire |
Color | Brown or Depends on inquire |
Temperature Resistant | -40℃—+260℃ |
Quality Certification | IATF16949:2016 & ISO9001:2008 |
MOQ | 1 pcs can be accept if have stock 50pc can be accept if have mold without stock 500-1000pcs if don't have mold |
Customized | OEM & ODM are welcome |
Package | Inner plastic bag + Outer carton box |
Oil Seal Stucture:
Type | Structure | Feature | Use |
Common single lip | B | It is generally used for sealing medium such as mineral oil and
water with high and low speed rotating shaft and reciprocating
motion. | Ordinary oil seal, used in the case of less dust and impurities,
resistance to medium pressure < 0.05Mpa occasions, the highest
line speed of 15m/s, reciprocating speed <0.1m/s. |
Normal double lips | FB
| In addition to the use characteristics of the S type oil seal, it
can also be dustproof. | Common oil seal, with dustproof lip can be dustproof, resistance to
medium pressure <0.05
In the case of MPA, the linear velocity is less than 15m/s. |
No spring type | BV | Spring-less single lip type inner-wrapped skeleton rubber oil seal. | Generally suitable for low speed working conditions, the sealing
medium is lubricating ester. Linear velocity is less than or equal
to 6m/s. |
Outer skeleton unillipped | W | Single lip with spring outer skeleton type rubber oil seal, thin
waist, good followability, good rigidity. | Ordinary oil seal, used in the case of less dust and impurities,
resistance to medium pressure <0.05MPa occasions. Rotating shaft
linear velocity ≤15m/s. |
Exoskeleton bilabial | FW | The double lip shell type rubber oil seal with a pair of lips, thin
waist, good followability, high stiffness and good coaxiality. | Common oil seal, with dustproof lip can be dustproof, resistance to
medium pressure <0.05
MPA occasions. The speed of 15 m/s or less. |
Assembled single lip | Z | The outer frame oil seal is made by the inner and outer frame
assembly and piping, and has the characteristics of high
installation accuracy, fast heat dissipation and heavy load. | Applicable to high temperature, high speed conditions under heavy
load conditions, medium pressure ≤ 0.05Mpa, the highest line speed
≤15m/s. |
Assembled double lip | FZ | The assembled outer frame oil seal with auxiliary lip has the
characteristics of dustproof, high installation precision, fast
heat dissipation and heavy load. | Suitable for high temperature, high speed, heavy load conditions
under dust conditions, medium pressure ≤ 0.05Mpa, the highest line
speed ≤15m/s. |
Unidirectional reflux type | Right-handed SR,
Left-handed DL | The oblique bars with an Angle are measured in the air of the lip.
Using the principle of fluid mechanics, the one-way pumping action
is produced and the backflow effect is obtained. | It is related to the direction of rotation of the shaft. Because of
the reflux effect, the radial force is smaller than the ordinary
oil seal, which reduces the wear and heat generation and improves
the service life. It is suitable for the occasion of medium
pressure < 0.05Mpa and the speed is less than or equal to 20m/s. |
Compression type | NY | Lips short, waist short and thick, with pressure resistance,
working pressure ≤ 3Mpa. | Suitable for medium pressure ≤ 3Mpa occasions, suitable for high
pressure pump shaft end oil seal, under normal circumstances PV
value ≤8. Rotating shaft linear speed ≤15m/s. |
Typical Applications
Primarily for applications with no pressure or very low pressure up
to 7psi (0.5bar) spikes*
General purpose seal for oil and grease retention for power
transmission, motors, pumps, gear boxes, fans, machine tools and
others.
Operating Range
Maximum Pressure: 3psi (0.2bar) continuous, 7psi (0.5bar)* max. pressure spikes
depending on shaft speed
Temperature: -58 to 400°F (-50 to 200°C) depending on seal material
Shaft Surface Speed: Up to 7,000 fpm (35m/s)* depending on shaft diameter and seal
material
Materials: NBR (Nitrile), FKM, ®, HNBR, EPDM, low temperature and low-friction
material grades.
Company Advantages:
Brand Advantage:
---It was awarded the honorary title of “Top Ten Brands of China
Auto Parts Industry” by the Organizing Committee of China Auto
Parts Industry General Appraisal, and became the “Customer of World
Expo Commercial Cards for Expo 2010 Shanghai”. In 2011, it became
the brand of CCTV-7.
Production Advantage:
---We have passed the IATF16949:2016 quality management
certification and have qualified environmental inspection
procedures and equipment;.
---We have the Advanced production equipment and process to provide
you with high quality and low price products and services
Service Advantage:
---We have a team for overseas market. In this team, we will follow
customers needs about the products and make sure customers are
satisfied with products.Also, we will try our best to solve
problems for customers and give them the best solutions.
Technology Advantage:
--- Introducing high-tech production line of automated production
lines and specializing in the development and production of various
rubber products, we also invite rubber experts to research new
technology, new formula of "drive belt" and "oil seal" and other
rubber products to make our products anti-aging, wear-resistant and
advanced level of resistance to high and low temperatures.
Team Advantage:
---In Tebiete, teamwork is critical from production, sales to
services. Small teams in each department will gather strength to
drive the development of the entire company.
FAQ:
Q : When can I get the price?
A : We usually quote within 24 hours after we get your inquiry. If
you are very urgent to get the price, please tell us by E-mail,so
that we will regard your inquiry as the first priority.
Q : How can I get a sample to check your quality?
A :After price confirmation, you can require for samples to check
our quality.
Q : Can you do the design for us?
A :Yes. We have a professional team with rich experience in
packaging box design and manufacturing. We can manufacture the
products as per your requirements.
Q : How long can I expect to get the sample?
A :It will be ready for delivery in 7-10 days. The samples will be
sent to you via express and arrive in 3-5 days.
Q : What about the lead time for mass production?
A :Usually 30-45 days after you confirm the PP sample and we
received your deposit.
